Ostsilloskoop

Üks lihtne koopia projektist "Poor Man’s Oscilloscope"
Arduino analoog PIN külge (max 40mA / 6 VDC).
Shunti kasutades võiks ilmselt kõrgustesse liikuda
Arduiino kood:

/* 
  Complete project details: https://randomnerdtutorials.com/arduino-poor-mans-oscilloscope/
*/

#define ANALOG_IN 0
 
void setup() {
  Serial.begin(9600); 
  //Serial.begin(115200); 
}
 
void loop() {
  int val = analogRead(ANALOG_IN);                                              
  Serial.write( 0xff );                                                         
  Serial.write( (val >> 8) & 0xff );                                            
  Serial.write( val & 0xff );
}​

Installi "Processing" soft https://processing.org
Processing kood: *.pde

/*
 * Oscilloscope
 * Gives a visual rendering of analog pin 0 in realtime.
 * 
 * This project is part of Accrochages
 * See http://accrochages.drone.ws
 * 
 * (c) 2008 Sofian Audry (See e-posti aadress on spämmirobotite eest kaitstud. Selle nägemiseks peab su veebilehitsejas olema JavaSkript sisse lülitatud.)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */ 
import processing.serial.*;
 
Serial port;  // Create object from Serial class
int val;      // Data received from the serial port
int[] values;
float zoom;
 
void setup() 
{
  size(1280, 480);
  // Open the port that the board is connected to and use the same speed (9600 bps)
  port = new Serial(this, Serial.list()[0], 9600);
  values = new int[width];
  zoom = 1.0f;
  smooth();
}
 
int getY(int val) {
  return (int)(height - val / 1023.0f * (height - 1));
}
 
int getValue() {
  int value = -1;
  while (port.available() >= 3) {
    if (port.read() == 0xff) {
      value = (port.read() << 8) | (port.read());
    }
  }
  return value;
}
 
void pushValue(int value) {
  for (int i=0; i<width-1; i++)
    values[i] = values[i+1];
  values[width-1] = value;
}
 
void drawLines() {
  stroke(255);
  
  int displayWidth = (int) (width / zoom);
  
  int k = values.length - displayWidth;
  
  int x0 = 0;
  int y0 = getY(values[k]);
  for (int i=1; i<displayWidth; i++) {
    k++;
    int x1 = (int) (i * (width-1) / (displayWidth-1));
    int y1 = getY(values[k]);
    line(x0, y0, x1, y1);
    x0 = x1;
    y0 = y1;
  }
}
 
void drawGrid() {
  stroke(255, 0, 0);
  line(0, height/2, width, height/2);
}
 
void keyReleased() {
  switch (key) {
    case '+':
      zoom *= 2.0f;
      println(zoom);
      if ( (int) (width / zoom) <= 1 )
        zoom /= 2.0f;
      break;
    case '-':
      zoom /= 2.0f;
      if (zoom < 1.0f)
        zoom *= 2.0f;
      break;
  }
}
 
void draw()
{
  background(0);
  drawGrid();
  val = getValue();
  if (val != -1) {
    pushValue(val);
  }
  drawLines();
}

... valmis